Filters
Question type

Study Flashcards

What is R-134a chemically? It is referred to as what?

Correct Answer

verifed

verified

What is the heart of the refrigerant system?

Correct Answer

verifed

verified

The refrigerant compressor is the heart ...

View Answer

When relative humidity is high,the air conditioner must work harder than when relative humidity is low.

A) True
B) False

Correct Answer

verifed

verified

What state is the refrigerant in the condenser?

Correct Answer

verifed

verified

Refrigerant enters a...

View Answer

Where is the refrigerant system desiccant located?

Correct Answer

verifed

verified

Accumator/...

View Answer

Performance testing on air conditioning is being discussed.Technician A says the engine should be operated at speeds over 3,000 rpm during the test.Technician B says a fan should be used to force air through the condenser and radiator.Who is correct?


A) Technician A only
B) Technician B only
C) Both A and B
D) Neither A nor B

E) A) and B)
F) All of the above

Correct Answer

verifed

verified

Technician A says the CFC-12 (R-12) service manifold hose fitting must be 1/2-inch male refrigerant flare nut at each end. Technician A says HFC-134a (R-134a) service manifold hoses use an ACME female nut.Who is correct?


A) Technician A only
B) Technician B only
C) Both A and B
D) Neither A nor B

E) C) and D)
F) A) and D)

Correct Answer

verifed

verified

A modern air conditioner system will have either an accumulator or a receiver-drier but not both.

A) True
B) False

Correct Answer

verifed

verified

Under normal operating conditions all of the following occurs inside the evaporator,EXCEPT:


A) The refrigerant removes heat from the outside air drawn across the evaporator core.
B) The refrigerant changes from a vapor to a liquid.
C) Heat entering the refrigerant causes it to change state.
D) The refrigerant absorbs heat.

E) B) and D)
F) All of the above

Correct Answer

verifed

verified

Where in the system is the receiver dryer located?


A) on the inlet to the condenser.
B) on the outlet of the evaporator.
C) on the outlet of the condenser.
D) none of the above.

E) C) and D)
F) B) and D)

Correct Answer

verifed

verified

C

Technician A says the Schrader-type service valve is automatically opened when the service hose is installed.Technician B says the Schrader-type service valve is automatically closed when the service hose is removed.Who is correct?


A) Technician A only
B) Technician B only
C) Both A and B
D) Neither A nor B

E) A) and C)
F) A) and D)

Correct Answer

verifed

verified

C

Explain why high pressure must be maintained in the condenser.

Correct Answer

verifed

verified

High pressure is nec...

View Answer

The refrigerant entering the condenser is in the liquid state.

A) True
B) False

Correct Answer

verifed

verified

What is the basic function of the automotive air conditioning system?

Correct Answer

verifed

verified

The basic function of the automotive air...

View Answer

All of the following statements about the hand valves in an air conditioning gauge manifold are true,EXCEPT:


A) When both hand valves are closed, both the low- and high-side hose ports are connected only to the low- and high-side gauges.

B) If either hand valve is cracked open and the center hose is opened, refrigerant pressure will equalize across the system.

C) The gauges show respective system pressures when the manifold hand valves are closed.

D) If both manifold hand valves are cracked, the pressures will equalize in the manifold and neither of the gauges will accurately indicate system pressure.

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

What does the term relative humidity mean?

Correct Answer

verifed

verified

Relative humidity is...

View Answer

What is the heart of the refrigerant system?

Correct Answer

verifed

verified

The refrigerant comp...

View Answer

What is one of the dividing points between the high and low sides of the refrigerant system?

Correct Answer

verifed

verified

The compressor and the expansi...

View Answer

Technician A says there is a common passage on a manifold and gauge set.Technician B says both hand valves on a manifold and gauge set must be closed to read service pressures.Who is correct?


A) Technician A only
B) Technician B only
C) Both A and B
D) Neither A nor B

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Explain why low pressure must be maintained in the evaporator.

Correct Answer

verifed

verified

Low pressure is necessary to cause the refrigerant to vaporize and absorb heat.

Showing 1 - 20 of 50

Related Exams

Show Answer